How to Apply GD&T to a Slot

Table according to DIN 508: dimensions in mm Thread d, a nominal size, a max a min e nominal size max e min f, h, k nominal size max k min Weight kg

How to Apply GD&T to a Slot A basic dimension is considered a theoretically exact dimension All a basic A half dimension could not be used to locate the slot If a 10±

Table according to DIN 508: dimensions in mm Thread d, a nominal size, a max a min e nominal size max e min f, h, k nominal size max k min Weight kg

how does slot machine work Where I work it is standard procedure to dimension slots from end to end, so QA can easily caliper the parts to check

Rear: Up to 10x PCIe slots, plus a slot dedicated to the OCP adapter Slot Dimensions, Width: 445 mm , height: 87 mm , depth: 766

how to dimension a slot This is why we go down a basic distance, a basic 10 in this case, from the top of the slot This is where we will define our feature of size Our size dimension

Slot dimension shows a wrong value for the slot length It looks like its reading the dimension off the inside tangents of