Feeler Gauges for Setting Nut Slots

Feeler Gauges for Setting Nut Slots nut slot height I've actually done this using a thin sheet of metal on a beater classical guitar that came from the factory wiith the nut slots cut too low It nuts and bolts slot If the string is touching the first fret, chances are the slot is tool low Confirmation of this is the string will buzz unfretted but not when

nuts and bolts slot So then the nut becomes the lowest angle But each fret along that line only needs to clear the fret above it So if all the frets are the same

nut slot depth Adjusting the Nut · If the nut is just a tiny bit too high, then you can lightly file down the grooves that the strings sit in · If the nut is Nut: Check nut slots height by pressing down at second fret OR: watch string at 12th fret when you